This product offers an excellent balance of properties: Superior formability in the as-supplied temper, good in service strength and good bending. All values are typical.

Temper	UTS (Rm)	YS (Rp0.2)	Total Elongation A80
T4 Delivery	≥200 MPa	≤130 MPa	≥26%
2% pre-strain + 20 min @185°C	≥240 MPa	≥200 MPa	≥18%

The chemical composition of this product corresponds to AA6016.

Si	Fe	Cu	Mn	Mg	Cr
1.0 - 1.5	≤ 0.50	≤ 0.20	≤ 0.20	≤ 0.25 - 0.60	≤ 0.10
Zn	Ti	V	Others, each	Others	Other, total
≤ 0.20	≤ 0.15	N/A	≤ 0.05	N/A	N/A

Density	2.7 x 10³ kg/m³
Elastic Modulus	70,000 N/mm²
Coefficient of Thermal Expansion	23.4 x 10-6 K-1
Thermal Conductivity	160 – 190 W/mK
Electrical Conductivity	26 – 30 m/Ωmm²

Our manufacturing footprint allows us to tailor solutions for automakers around the world. Novelis Advanz™ 6HF – s200 is produced in the following locations:

Asia

Europe

North America

Acid Etch TiZr PT3 AlubVs RP4107 E1

Acid Etch TiZr PT3 AlubVS RP4107 E1 PL39SX

Acid Etch TiZr A951

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

Cut-to-length Laser Blank

Cut-to-length Laser Blank Edge Trimming Slitting

Cut-to-length Laser Blanks Edge Trimming Slitting

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

0.9 -1.5 mm

0.9 -1.6 mm

0.8 - 3.5 mm

Please contact your Novelis sales representative for more information about available widths and gauges.