Novelis Advanz™ 5F - RC5754

Novelis Advanz™ 5F – RC5754

Home > Novelis Advanz™ 5F – RC5754

Novelis RC5754 (EN AW-5754) belongs to the group of the strain hardening AlMgMn alloys. The strength level is controlled by cold forming and final annealing. For use in automotive bodies a soft, very formable condition is desirable. This is achieved by a final gauge heat treatment. In contrast to EN AW-5182 material RC5754 has a lower level of strength and shows no stress corrosion cracking (SCC) sensitivity.

RC-5754 belongs to EN AW-5754 and is available within closed loop recycling agreements

Mechanical Properties

All values are typical.

Temper	UTS (Rm)	YS (Rp0.2)	Total Elongation A80
O/H111	≥240 MPa	≥115 MPa	≥23%
2% pre-strain + 20 min @185°C	≥245 MPa	≥125 MPa	≥21%

Chemical Composition (wt. %)

The chemical composition of this product corresponds to AA5754.

Si	Fe	Cu	Mn	Mg	Cr
≤ 0.4	≤ 0.4	≤ 0.1	≤ 0.5	2.6-3.6	≤ 0.3
Zn	Ti	V	Others, each	Others	Other, total
≤ 0.2	≤ 0.15	≤ 0.05	≤ 0.05	N/A	N/A

*Only in European production of this product.

Physical Properties

Density	2.7 x 10³ kg/m³
Elastic Modulus	70,000 N/mm²
Coefficient of Thermal Expansion	24 x 10-6 K-1
Thermal Conductivity	132 W/mK
Electrical Conductivity	19 m/Ωmm²

Production Regions

Our manufacturing footprint allows us to tailor solutions for automakers around the world. Novelis Advanz™ 5F - RC5754 is produced in the following locations:

Europe

What surface treatments are available?

Acid Etch
TiZr
PT3
AlubVS
MP-404
E1
DC290
PL39SX

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

What finishing processes are available?

Cut-to-length
Laser Blank
Edge Trimming
Slitting

Additional services may be available through our distributors, please contact your Novelis sales representative for more information.

What gauges are available?

0.8 - 3.0mm

Please contact your Novelis sales representative for more information about available widths and gauges.

Improve Your Experience